• Facebook
  • Twitter
  • Instagram
  • YouTube
  • Blogger

View ALL

Heat Seals & Film Laminate

E-Zee Heat Seals and Film Laminates stiffen, finish and 
permanently bond patches, emblems and appliqués to garments.

E-Zee Film Laminate
2 mil Polyurethane #3218

is a film laminate for finishing the backs of patches and emblems. It is also used to water proof the back side
of embroidered weather 
resistant garments after embroidering on them.

 


 

E-Zee Heat Seal
5 mil Nylon #4220

is a highly bondable heat seal that is used primarily to permanently adhere patches and emblems to garments and hats. Excellent adhesion to acetate, acrylic, cotton, rayon, silk and wool fabrics.
 


 

E-Zee Heat Seal
5 mil Polyester #5256 
 

Can be used along with Film Laminate #3218 or alone to produce permanent seals on patches and appliqués. Create an ecomonimal patch using 3218 as a stiffener before embroidery, then add 5250  as an adhesive coat. Adheres to most fabrics. Excellent adhesion to cotton, polyester and blended fabrics.

Heat Press Instructions:
Heat Laminate 3218

Machine Setting 120°C to 130°C (248°F to 266°F)
Dwell Time 20 to 30 seconds
Pressure 2.8 to 4.2 Bar (40-60 psi)

Heat Press Instructions:
Heat Seals 4220 & 5256

Machine Setting 160°C to 200°C (320°F to 392°F)
Dwell Time 20 to 30 seconds
Pressure 2.8 to 4.2 Bar (40-60 psi)

Note: always test at lowest temperature first.
Click here to view a How to Make Patches instruction sheet.

Click here to view a How to Make Appliqués instruction sheet.

Advertisement
Advertisement

Backing

Advertisement